Tech Support

microLaser 40 Series Printer Software This page supports these models: microLaser 30S, microLaser 30D, microLaser 40D, 7930S, 7930D, 7940D ·Legacy· Technical support has been discontinued for all listed models. Introduced: Aug 95 Discontinued: May 98 Replaced by: microLaser 401 Printer Software - Version 2.10.0 Do not use this version with the GENICOM IPDS interface. Base Software Disk 1 7940_2100_base1.exe Size: 1,1 M Base Software Disk 2 7940_2100_base2.exe Size: 396 K PCL5 Software 7940_2100_PCL.exe Size: 967 K PCL Fonts Disk 1 7940_2100_PCL_fonts1.exe Size: 878 K PCL Fonts Disk 2 7940_2100_PCL_fonts.exe Size: 525 K PostScript 7940_2100_PostScript.exe Size: 525 K PostScript Fonts 7940_2100_PostScript Fonts.exe Size: 525 K Printer Software - Version 2.06.6 Use this version with the GENICOM IPDS interface. Base Software Disk 1 2066b1.exe Size: 1.1 M Base Software Disk 2 2066b2.exe Size: 396 K PCL Software 2066pcl5.exe Size: 967 K PCL Fonts Disk 1 2066pcf1.exe Size: 876 K PCL Fonts Disk 2 2066pcf2.exe Size: 525 K AFP/IPDS FlexIO Card Software IPDS Twinax 7940_TX-IPDS_1061_tray2.exe Version: 1061 (primary tray is bottom tray) Size: 715K IPDS Twinax 7940_TX-IPDS_1061_tray1.exe Version: 1061 (primary tray is top tray) Size: 714K IPDS Coax 7940_CX-IPDS_1062.exe Version: 1062 Size: 723K IPDS 3812 additional fonts 7940_3812 fonts.exe Size: 761K

Specifications subject to change without notice. ® All trademarks are property of their respective holders at the time of this publication. If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support. Copyright © 2000 — GENICOM,