| mL400 TechNotes |
mL400-01
15 Sep 2000 |
Consumables and Preventative Maintenance |
| To maintain image quality and proper operation, various supplies and parts of the printer
are required to be cleaned and replaced periodically. This note expands and supplements the user level maintenance
refered to in GEK-89470, microLaser 400 Operations. |
mL400-02
18 Sep 2000 |
Cleaning the Erase Lamp Assembly |
| The Erase Lamp must be cleaned when the Drum is replaced, or when print quality is
unacceptable. |
mL400-03
18 Sep 2000 |
Toner Waste Bottle Replacement |
| The Toner Waste Bottle must be replaced when a bottle of Toner is added. Failing to replace the Waste Bottle can cause print
quality problems and can damage the printer. |
mL400-04
29 Sep 2000 |
ENGINE ERROR 111 |
| The printer display shows CALL FOR SERVICE ENGINE
ERROR 111. |
mL400-05
29 Sep 2000 |
Printing Stops |
| The printer stops printing. The hard drive icon on the display is lit, indicating spooled
data. |
mL400-06
29 Sep 2000 |
ENGINE ERROR 82 |
| The printer display shows CALL FOR SERVICE ENGINE
ERROR 82. |
mL400-07
4 Oct 2000 |
Black Line on Edge of Page |
| The page prints with a black line along the edge closest to the front of the printer. |
mL400-08
3 Oct 2001 |
Toner Dumping |
|
Any of the following symptoms are experienced:
- Streaks appear on the printed job.
- Excessive toner in the transfer unit area.
- Damage to the drum, especially scoring around the end towards the back of the printer.
A black line will print on the edge of the page.
- The printer hangs while printing with the DISK indicator active.
- The printer display shows ENGINE ERROR 111.
|
