| |
|
microLaser 200, 400, C4 Service Documentation
|
| |
This page supports these models: microLaser
200, microLaser 400, microLaser C4 |
   |
 What are PDF files, and why can't I read them? |
Disclaimer:
TallyGenicom usually takes care to ensure that the information is complete, accurate and up-to-date. These documents
are an exception. They are poorly written and laid out.
TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject
to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without
warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of
merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable
for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special
damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states
do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing
limitation may not apply.
Download and use at your own risk. |
| English |
 mL200_svc
3.5 M |
mL200 Service Manual |
mL400_svc
5.4 M |
mL400 Service Manual
Note: Error codes in this manual are shown as the hexadecimal equivalent
of the decimal codes shown on the printer display.
|
mLC4_svc
9.3 M |
mLC4 Service Manual |
|
