9035-Spec-01

TechNote 9035-SPEC-01
9035 Paper Handling Specifications (Feeds and Speeds)
23 May, 2006 Ed Palmer

Notes

Some early data sheets showed that the 9035 has a Multi-purpose Tray. This is not correct.
Measured print speeds are independent from print resolution.
Speed is rated in images per minute. In duplex mode, one sheet is equal to two images.
Capacity may vary depending on the media thickness.
Listed capacities for paper other than bond is approximate.
Specifications are rated with the current product version (firmware).
Printers may accomodate media outside the listed specifications, but this is not guaranteed. When using media outside the specifications, one printer may print properly, but another printer of the same model may not. A printer may print properly for some time, then have feeding and printing problems. In both instances, the printer is on the edge of tolerance for the media, and the media is out of specification for the printer.

First Page Out Time
Ready	< 10 sec
PowerSaver	< 20 sec

Printable Area

PostScript:

Edge to edge

PCL:

Normal area mode: 4 mm unprintable edge
Expanded area mode: Edge to edge

Note: The standard PCL driver supports only normal area mode.

Legend
Abbreviation	Meaning	Abbreviation	Meaning
Sx	Simplex speed	Trans	Media type is Transparency
Dx	Duplex speed	LEF	Long Edge Feed
Thick1	Increased fuser temperature Slower print speed	SEF	Short Edge Feed
Thick2	Increased fuser temperature Slower print speed

Paper Handling Specifications
					Base Printer		550 Sheet Feeder (Tray 2/3/4)		Duplexer	500 Sheet Offset Output Tray
					Tray 1	Tray 2
Capacity >>					150 Bond	550 Bond	550 Bond			500
Paper Weight >>>>		Grammage			60-216 g/m²
		Bond			16-58 lbs
		Index card stock			33-120 lbs
		Tag card stock			37-133 lbs
		Cover card stock			22-80 lbs
		Paper			Base Printer		550 Sheet Feeder Options		Duplexer Option	500 Sheet Offset Output Tray Option
Media Size		Feed	Inches	mm	Tray 1	Tray 2	Tray 3	Tray 4
These sizes are automatically sensed:
Legal		SEF	8.5 x 14	216 x 356	Plain / Sx 29.2 / Dx 19.0 Thick1 / Sx 25.2 / Dx 18.1 Thick2 / Sx 10.7 / Dx 10.7				Supported	Supported
Folio		SEF	8.5 x 13	216 x 330	Plain / Sx 31.1 / Dx 19.8 Thick1 / Sx 25.3 / Dx 18.5 Thick2 / Sx 10.7 / Dx 10.7
A4		SEF	8.3 x 11.7	210 x 297	Plain / Sx 34.0 / Dx 20.9 Trans 17.6 Thick1 / Sx 25.4 / Dx 19.1 Thick2 / Sx 10.8 / Dx 10.8
Letter		SEF	8.5 x 11	216 x 279	Plain / Sx 35.7 / Dx 21.5 Trans / Sx 17.6 Thick1 / Sx 25.4 / Dx 19.3 Thick2 / Sx 10.8 / Dx 10.8
B5		SEF	7.2 x 10.1	182 x 257	Plain / Sx 35.8 / Dx 22.0 Thick1 / Sx 25.4 / Dx 19.7 Thick2 / Sx 10.8 / Dx 10.8
Executive		SEF	7.25 x 10.5	184 x 267	Plain / Sx 35.7 / Dx 21.8
A5		SEF	5.6 x 8.3	149 x 210	Supported
These sizes must be set from the printer panel or web page:
A6		LEF	5.8 x 4.1	148 x 105	Supported
Statement		SEF	5.5 x 8.5	140 x 216	Supported				Not Supported	Supported
C5 Envelope		LEF	9 x 6.4	229 x 162	Supported
DL Envelope		LEF	8.7 x 4.3	220 x 110	Supported
Com10 Envelope		LEF	9.4 x 4.1	241 x 105	Supported
Monarch Envelope		LEF	7.5 x 3.9	190 x 98	Supported
Custom	Width		3.88 to 8.50	99 to 216	Supported		Not Supported		Supported	Supported
	Length		5.83 to 14.00	148 to 356

Specifications subject to change without notice.

® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support.

TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.