TechNote IP-UPG-01
Intelliprint Series
Printer Firmware Upgrade
Chapter 1 - Introduction
11 Feb 2003 Ed Palmer
Models: mL210, mL280, mL280+, mL320, mL401, mL401+, mL450, LN21, LN28, LN28+, LNM40, LN45, cL160, 9035
Summary: microLaser series page printers with the Intelliprint controller have the operating system firmware stored in flash. The firmware can be flash upgraded by several methods.
|
Introduction |
|
|
|
Flash Upgrading |
Upgrading by flashing through parallel or network |
|
|
SIMM Replacement |
Upgrading by replacing the SIMM. |
|
|
SIMM Copy |
Performing a SIMM to SIMM copy on a printer. |
|
|
IPDS Upgrades |
Upgrading the IPDS code to the latest revision. |
A table of the latest revisions for each model is located on the Flash Code page.
The original Flash SIMM used in the Intelliprint series has been superseded by an new version. If an optional SIMM is installed in Flash Slot 2, this can cause some operational issues. Refer to IP-MEM-04 for details.
|
|