TechNote IP-MEM-01
Intelliprint Series
DRAM Memory For the D Series Controllers
28 March 2002 Ed Palmer

Summary: RAM is used to expand the operating memory of the printer. Increasing RAM can allow the use of larger paper sizes, duplexing and higher graphics resolution. This note documents the options and configurations, and illustrates the various versions of memory used.

Details:

• The Intelliprint controller has three RAM slots. A standard printer ships with one slot occupied.
• The mL320, mL401 and LNM40 ship with 32 MB of memory.
• The mL210, mL280, LN21 and LN28 ship with 32 MB of memory as of March 2002. Prior to this, these models shipped with 16MB.
• A maximum of 96 MB can be installed in all models.

Memory Configurations:

mL320, mL401, LNM40 (ships with 32 MB) Recommended Memory Configuration
Media Size	600 x 600 DPI		1200 x 1200 DPI		With Bar Code Option
	Simplex	Duplex	Simplex	Duplex	(Minimum)
Letter / A4	32 MB	32 MB	32 MB	64 MB	32 MB
Legal	32 MB	32 MB	32 MB	64 MB	32 MB
Ledger / A3	32 MB	32 MB	64 MB	96 MB	32 MB

mL280, LN28 (ships with 32 MB) Recommended Memory Configuration
Media Size:	600 x 600 DPI		1200 x 1200 DPI		With Bar Code Option
	Simplex	Duplex	Simplex	Duplex	(Minimum)
Letter / A4	16 MB	32 MB	32 MB	48 MB	32 MB
Legal	16 MB	32 MB	32 MB	64 MB	32 MB
Ledger / A3	32 MB	32 MB	48 MB	96 MB	32 MB

mL210, LN21 (ships with 32 MB) Recommended Memory Configuration
Media Size:	600 x 600 DPI		1200 x 1200 DPI		With Bar Code Option
	Simplex	Duplex	Simplex	Duplex	(Minimum)
Letter / A4	16 MB	32 MB	32 MB	48 MB	32 MB
Legal	16 MB	32 MB	32 MB	64 MB	32 MB

Options:

The RAM used in the Intelliprint 1 controller has been sourced from various vendors during the product life. The following table outlines the different SIMMs used.

Product	Type	Photo	Marking
32 MB Memory SIMM MLXXXM-32	Type C		1W-7832X4-4ETMV-60 or CENTON 44A515253-001
	Type B		SEC KMM5328004BSW-6
	Type A		Kingston - USA KTM8x32L-60ET-CE 2152-002.A00 4 chip version
16 MB Memory SIMM MLXXXM-16 This product series was discontinued in March 2002	Type C	[photo TBA]	Quadrant
	Type B		CENTON 6A0103P12 CGEN432EX16/6
	Type A		MT8D432 MB

Cautions:

Not all vendors have products that meet GENICOM's requirements. The correct memory SIMMs appear as above. Kingston no longer manufactures the Type A 32 MB SIMM. This version of the SIMM was a special build for GENICOM. The replacement SIMM listed by Kingston will not work! The use of unqualified memory may cause operational issues, including: random displays of SERVICE ERROR 02 and SERVICE ERROR 03 dropping characters at random adding square boxes to text no display on power up printing black pages on power up or other odd symptoms.

Copyright © 2003 GENICOM Specifications subject to change without notice. ® All trademarks are property of their respective holders at the time of this publication. If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support. TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, GENICOM assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of GENICOM. This information is provided "as is" without warranty of any kind. GENICOM disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall GENICOM, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if GENICOM, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.