TechNote IP-MEM-03
Intelliprint Series
Flash Memory Options
4 Feb 2003 Ed Palmer
Summary: The Flash memory options are used for the storage of PostScript based fonts, graphics and overlays. PCL fonts, macros, and overlays can be stored on the user flash and loaded into RAM on printer power up. These options are qualified to operate with IntelliPress. The option mounts on the Intelliprint controller board.
Note: Some marketing descriptions of the Flash options include "for PostScript". This is misleading as PostScript is native to the printer and the Flash supports PostScript and PCL.
Flash for S series controllers:
mL280+, LN28+, mL401+, mL450, LN45, cL160
16 MB User Flash DIMM, MLXXXF-FP.
Flash for D series controllers:
mL210, mL280, mL320, mL401, LN21, LN28, LNM40
P03
16 MB User Flash SIMM, MLXXXF-FM.
current product
The Manufacturer part number on the board is 6B0494P03. This version is commonly referred to as P03.
P02
8 MB User Flash SIMM, MLXXXF-FL.
discontinued - replaced by P03
The Manufacturer part number on the board is 6B0494P02. This version is commonly referred to as P02.
P01
8 MB User Flash SIMM, MLXXXF-FL.
discontinued - replaced by P02
The Manufacturer part number on the board is 6B0494P01. This version is commonly referred to as P01.
|
Copyright © 2003 GENICOM Specifications subject to change without notice. ® All trademarks are property of their respective holders at the time of this publication.  If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support. TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, GENICOM assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of GENICOM. This information is provided "as is" without warranty of any kind. GENICOM disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall GENICOM, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if GENICOM, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply. |
