TechNote IP-RESET-01
Intelliprint Series
Reset the Printer to Factory Defaults
26 August, 2005 Ed Palmer

Summary: The printer may require a return to factory defaults for any of the following reasons:

• The user may desire to return to default.
• The user may desire to aquire a new IP address via DHCP.
• Certain flash code upgrades may require a reset.
• The printer settings may become corrupted and cause errors or lockups.

Notes:

• A printer reset does not reset the NET32 network interface. Refer to IP-RESET-02 to reset the NET32.
• Factory Defaults have two settings- U.S. and Non-U.S. Refer to TechNote TBA for details.
• U.S. defaults- Executive, Legal - Non-U.S. defaults- B5, B4

Factory Defaults from Control Panel:

Press MENU
Press NEXT until the display shows SYSTEM MENU
Press SELECT- the display shows FACTORY DEFAULTS
Press SELECT- the display shows U.S.
To reset to US defaults, press SELECT
To reset to International defaults, press NEXT- the display shows NON-U.S., press SELECT

Factory Defaults from Web Page:

Open the printer web page.
Select ADMINISTRATION
On the FACTORY DEFAULTS box, select U.S. or NON-U.S.
On the bottom of the page, press the SUBMIT button

NVRAM Reset from Control Panel:

The NVRAM reset clears the NVRAM table- the NVRAM table is rebuilt with factory defaults during printer bootup. A NVRAM reset can clear issues that occur during the printer boot cycle.

Turn the printer power off
Press and hold the following keys:

All models: CANCEL | MENU | PREVIOUS

cL160: CANCEL | STATUS | PREVIOUS

Turn the power on
The printer display shows NVRAM RESET
Press SELECT
The printer continues to boot normally

If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support.

TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.