TechNote IP-Spec-03
mL and LN Series
Intelliprint Controller Specifications
18 Jun 2004Ed Palmer
Summary: This table provides detailed specifications on the Intelliprint controllers.
| Specification |
Model
|
||||||||||||
| cL160 | mL450 LN45 |
mL401+ (5 ) |
mL260 | mL210+ | mL280+ | mL210 LN21 |
mL210N LN21N |
mL280 | mL280N LN28 |
mL320 mL401 |
mL320N mL401N LNM40 |
||
| Intelliprint Controller |
Series (1) |
S (Intelliprint IV)
|
D (Intelliprint)
|
||||||||||
| CPU |
PMC-Sierra (MIPS) RM5231A 64-Bit
RISC
|
QED (MIPS) RM5230 64-Bit RISC
|
|||||||||||
| CPU Speed |
405 MHz
|
225 MHz (P01)
360 MHz (P03) |
405 MHz
|
360 MHz
|
133 MHz (2)
166 MHz |
166 MHz
|
133 MHz (3)
|
166 MHz | |||||
| Flash Slots |
1
|
2
|
|||||||||||
| Operating Flash |
Onboard
|
SIMM in Flash Slot 1
|
|||||||||||
| User Flash |
DIMM option in Flash Slot
|
SIMM option in Flash Slot 2
|
|||||||||||
| Flash Description |
Refer to IP-MEM-03
|
||||||||||||
| PCL |
PCL6 (PC XL 2.0), PCL5e, PJL
|
PCL6 (PC XL 2.0), PCL5e, PJL |
PCL5e
|
||||||||||
| PostScript |
Adobe PostScript 3
|
||||||||||||
| Controller P/N |
6A1384P01
6A1384P02 |
6A1326P01
6A1326P03 |
6A1369P02
|
6A1325P01
|
6A1214P01
|
6A1206P01
|
6A0545G01
|
6A0689P01 | |||||
| Memory | Standard |
128 M
|
64 M
|
16 M (6),
32 M
|
32 M
|
||||||||
| Max |
256 M
|
96 M
|
|||||||||||
| Type |
SDRAM
|
DRAM
|
|||||||||||
| Slots |
2
|
3
|
|||||||||||
| Description |
Refer to IP-MEM-05
|
Refer to IP-MEM-01
|
|||||||||||
| Memory Compression |
No
|
Yes
Product Version S1.83 or higher |
Yes |
No
|
|||||||||
| Interfaces | Parallel |
IEEE-1284
|
|||||||||||
|
USB
|
Hi-Speed USB, 2.0, 480 Mbs
|
n/a
|
Hi-Speed USB, 2.0, 480 Mbs
|
Full Speed, 1.1
15 Mbs |
n/a
|
Full Speed, 1.1
15 Mbs |
n/a
|
||||||
| Network - Standard 4 |
Net32 EA (P01)
GL100 (P02) |
Net32i
(P01)
GL100 (P03) |
GL100 (7)
|
Net32i
|
|
Net32 EA
|
|
Net32 EA
|
none
|
Net32 EA
|
|||
| Network - Option 4 |
Net32 EA, Net32 CX
|
||||||||||||
| Serial |
option
|
option
|
option
|
option
|
option
|
option
|
option
|
option
|
option
|
option
|
|||
| Twinax IPDS |
|
option
|
option
|
|
option
|
option
|
option
|
option
|
option
|
option
|
|||
| Twinax SCS |
|
option
|
|
option
|
option
|
option
|
option
|
option
|
option
|
||||
| Coax IPDS |
|
option
|
|
option
|
option
|
option
|
option
|
option
|
option
|
||||
| Coax SCS |
|
option
|
|
option
|
option
|
option
|
option
|
option
|
option
|
||||
| I/F Slots |
1
|
2
|
1
|
2
|
2
|
2
|
2
|
2
|
2
|
|
|||
| I/F Slots Available |
0
|
2
|
1
|
2
|
2
|
1
|
2
|
1
|
2
|
1
|
|||
| Toner | Toner Saver |
2 Level
|
4 Level
|
2 Level
|
2 Level
|
4 Level
|
4 Level
|
4 Level
|
4 Level
|
4 Level
|
4 Level
|
||
Notes:
1 - S and D are references used by Technical Support. Intelliprint
is the marketing name.
2 - The original mL210 controller was upgraded from 133 to 166 MHz.
3 - The original mL320 controller was 133 MHz, the mL401/LNM40
was 166 MHz. The mL401 controller is backward compatible with the mL320 controller.
Late versions of the mL320 were built with the 166 MHz controller.
4 - Refer to IP-NET-01 for details
on the Net32.
5 - Refer to TechNote IP-401+-01
for mL401+ details.
6 - Early models shipped with 16 M as standard. Later models shipped
with 32M.
7 - Early models of the mL210+ shipped with the Net32 EX instead of the
GL100.
8 - USB 1.1 at 15 Mb/s
9 - USB 2.0 at 480Mb/s
|
Copyright © 2003 GENICOM Specifications subject to change without notice. ® All trademarks are property of their respective holders at the time of this publication.  If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support. TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, GENICOM assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of GENICOM. This information is provided "as is" without warranty of any kind. GENICOM disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall GENICOM, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if GENICOM, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply. |