mL450-Spec-01

TechNote mL450-SPEC-01
Intelliprint mL450, LN45
Paper Handling Specifications (Feeds and Speeds)
14 July 2005 Ed Palmer

Notes

Measured print speeds are independent from print resolution, except as noted.
Speed is rated in images per minute. In duplex mode, one sheet is equal to two images.
Capacity may vary depending on the media thickness.
Listed capacities for paper other than bond is approximate.
Paper weights are for bond paper. For equivalent weights for other paper types, refer to TechNote Paper-02.
Specifications are rated with the current product version (firmware).
Printers may accomodate media outside the listed specifications, but this is not guaranteed. When using media outside the specifications, one printer may print properly, but another printer of the same model may not. A printer may print properly for some time, then have feeding and printing problems. In both instances, the printer is on the edge of tolerance for the media, and the media is out of specification for the printer.

First Page Out Time
Ready (within 30 seconds of a previous job)	< 5 sec
Stop	< 18 sec
PowerSaver	< 60 sec

Printable Area
PostScript	Edge to edge
PCL	4mm unprintable edge (normal area mode) Edge to edge (expanded area mode)

Paper Handling Specifications

Paper

Base Printer

High Cap Feeder

Envelope
Feeder

Finisher

Duplexer

Feed

Inches

Tray 1

Tray 2

MBF

Tray 3

Tray 4

Tray 5

Capacity >>

500 bond

50 bond

500 bond

1000 bond

100 envelope

3000 bond

Paper Weight >>

Grammage g/m²

64-105

64-200

64-105

60-165

64-105

Bond- lbs

17-28

17-53

17-28

16-90

17-28

Index card stock- lbs

35- 57

35- 110

35- 57

33-181

35- 57

Tag card stock - lbs

39-58

39-122

39-58

37-103

39-58

Cover card stock - lbs

24-65

34-74

24-65

22-62

24-65

Media Size

Statement (Half-Letter)

LEF

8.5 x 5.5

216 x 140

Sx 45
Dx 39

Not
Supported

Supported

Not
Supported

LEF

8.3 x 5.6

210 x 149

B5 JIS LEF (Non-US)

LEF

10.1 x 7.2

257 x 182

Sx 45
Dx 39

Sx 45
Dx 35

Sx 44
Dx 42

Supported

Executive (US)

LEF

10.5 x 7.25

267 x 184

A4 LEF

LEF

11.7 x 8.3

297 x 210

Letter LEF

LEF

11 x 8.5

279 x 216

Letter SEF

SEF

8.5 x 11

216 x 279

Not
Supported

Sx 28
Dx 28

Not
Supported

A4 SEF

SEF

8.3 x 11.7

210 x 297

Folio (13" Legal)

SEF

8.5 x 13

216 x 330

Sx 28
Dx 17

Sx 27
Dx 17

Sx 25
Dx 16

Sx 25
Dx 17

Legal (US)

SEF

8.5 x 14

216 x 356

B4 JIS (Non-US)

SEF

10.1 x 14.3

257 x 364

SEF

11.7 x 16.5

297 x 420

Sx 24
Dx 16

Sx 22
Dx 14

Sx 24
Dx 16

Ledger

SEF

11 x 17

279 x 432

A6 (Postcard)

LEF

5.8 x 4.1

148 x 105

Not
Supported

Sx 22

Not
Supported

C5 Envelope

LEF

9 x 6.4

229 x 162

Sx 22

DL Envelope

LEF

8.7 x 4.3

220 x 110

Com10 Envelope

LEF

9.4 x 4.1

241 x 105

Monarch Envelope

LEF

7.5 x 3.9

190 x 98

Legend
Abbreviation	Meaning	Abbreviation	Meaning
Supported	Supported	MBF	Multi-Purpose Bypass Feeder
Not Supported	Not supported	LEF	Long Edge Feed
Sx	Simplex speed	SEF	Short Edge Feed
Dx	Duplex speed	US	Available only when Factory Default is set to U.S.
Thick	Media Type is Cardstock or Label	Non-US	Available only when Factory Default is set to Non-U.S.
Trans	Media type is Transparency	Italics	Alternative paper name

Feed Path

Specifications subject to change without notice.

® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support.

TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, GENICOM assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of GENICOM. This information is provided "as is" without warranty of any kind. GENICOM disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall GENICOM, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if GENICOM, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.