SUMMARY: To determine the current page count, print the FPS Config Page.

PROCEDURE:

• Press READY to take the printer offline.
• Press and hold SELF TEST until the display shows PCL CONFIG PAGE | START.
• Press + the display shows FPS CONFIG PAGE.
• Press ENTER- the FPS status report prints.

The page count is shown in the bottom right corner of the status page.

While the printer does internally track the page count for the print unit (rated at 40,000 pages), this count is not accesible. If the user desires to track the count on a new print unit, print the FPS Config Page and note the count (or tape the count to the print unit).

Copyright © 2002 GENICOM, Specifications subject to change without notice. ® All trademarks are property of their respective holders at the time of this publication. If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support. TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, GENICOM assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of GENICOM. This information is provided "as is" without warranty of any kind. GENICOM disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall GENICOM, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if GENICOM, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.