TechNote Paper-01c
JIS (Japanese Metric) Paper Sizes
23 Dec 2002 Ed Palmer

JIS A Sizes (same as ISO 216)
Size  

millimeters

inches

   

width

height

width

height

4A0   1,682 2,378 66.22 93.62
2A0   1,189 1,682 46.81 66.22
A0   841 1,189 33.11 46.81
A1   594 841 23.39 33.11
A2   420 594 16.54 23.39
A3   297 420 11.69 16.54
A4   210 297 8.27 11.69
A5   148 210 5.83 8.27
A6   105 148 4.13 5.83
A7   74 105 2.91 4.13
A8   52 74 2.05 2.91
A9   37 52 1.46 2.05
A10   26 37 1.02 1.46

JIS B Sizes
Size  

millimeters

inches

   

width

height

width

height

B0   1,030 1,456 40.6 57.3
B1   728 1,030 28.7 40.6
B2   515 728 20.3 28.7
B3   364 515 14.3 20.3
B4   257 364 10.1 14.3
B5   182 257 7.2 10.1
B6   128 182 5.0 7.2
B7   91 128 3.6 5.0
B8   64 91 2.5 3.6
B9   45 64 1.8 2.5
B10   32 45 1.3 1.8


Copyright © 2005 TallyGenicom

Specifications subject to change without notice.
® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact
TallyGenicom Technical Support.

TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.