mL320, mL401, LNM40 Flash Code

microLaser 401 (Aug 1999 - Aug 2002)
LNM40 (Aug 1999 - Aug 2002) microLaser
320 (Nov 1998 - Sep 1999)

  Laser Printer Information
 
 

  Intelliprint Controller Flash Code
Upgrade Instructions
TechNote IP-UPG-01 Read Me
If the printer has a Net32 network interface, ensure the Network Version is 1.0/17 or higher. Refer to the Net 32 Flash Code Page.

  Intelliprint Controller Flash Code
Standard Interface
Intermediate Upgrade Code

40-32_standard_330
Product Version: 3.30
Supports File Format 3 and P01 Code SIMM
Date: 13 Nov 2000
Size: 4.8 M

This version of code is to be used in the incremental upgrade to the versions below. Refer to the instructions above.

This version of code changes the format of the User Flash SIMM. Any forms, fonts or barcodes will be lost. After upgrading, the Flash SIMM must be restored from a backup .LOD file. For more information, refer to TechNote IP-18. Contact TallyGenicom Technical Support for further assistance.

This version or higher required for use of barcode kits and the new Ethernet card.
Standard ASCII Code
Supports parallel, serial and Ethernet

40-32_standard_354
Product Version: 3.54
Supports File Format 3 and P01, P02 and P03 Code SIMMs
Date: 22 Apr 2002
Size: 7.3 M

Ensure the Product Version is 3.30 or higher before upgrading to this version.

  Intelliprint Controller Flash Code
IBM Interfaces
Intermediate Upgrade Code

40-32_standard_330
Product Version: 3.30
Supports File Format 3 and P01 Code SIMM
Date: 13 Nov 2000
Size: 4.8 M

This version of code is to be used in the incremental upgrade to the versions below. Refer to the instructions above.

This version of code changes the format of the User Flash SIMM. Any forms, fonts or barcodes will be lost. After upgrading, the Flash SIMM must be restored from a backup .LOD file. For more information, refer to TechNote IP-18. Contact TallyGenicom Technical Support for further assistance.

This version or higher required for use of barcode kits and the new Ethernet card.
Coax SCS Code
Supports parallel, serial, Ethernet and coax SCS.

40-32_CX-SCS_8241
Product Version: 82.41
Supports File Format 3 and P01, P02 and P03 Code SIMMs
Date: 18 Jan 2001
Size: 7.4 M

If the Product Version is not 82.30 or higher, flash to version 3.30 before upgrading to this version.
Twinax SCS Code
Supports parallel, serial, Ethernet and twinax SCS.

40-32 TX-SCS_7241
Product Version: 72.41
Supports File Format 3 and P01, P02 and P03 Code SIMMs
Date: 18 Jan 2001
Size: 7.4 M

If the Product Version is not 72.30 or higher, flash to version 3.30 before upgrading to this version.
Coax IPDS Code
Supports parallel, serial, Ethernet, coax IPDS and Ethernet IPDS (port 5001)

40-32_CX-IPDS_6341
Product Version: 63.41
Date: 24 Jan 2001
Size: 8.1M

If the Product Version is not 63.30 or higher, flash to version 3.30 before upgrading to this version.

Refer to TechNote IP-01D before upgrading

IPDS_Fonts_3
Version: 3
(Font code is required only when upgrading from 63.30 or below.)
Twinax / Ethernet IPDS Code
Supports parallel, serial, Ethernet, twinax IPDS and Ethernet IPDS (port 5001)

40-32_TX-IPDS_5244
Supports File Format 3 and P01, P02 and P03 Code SIMMs
Product Version: 52.44
Size: 8.1 M

If the Product Version is not 52.30 or higher, flash to version 3.30 before upgrading to this version.

Refer to TechNote IP-01D before upgrading.

IPDS_Fonts_3
Version: 3
(Font code is required only when upgrading from 52.30 or below.)