|
|
This
product has been discontinued and replaced by the 3860/3880!
Printing
Technology: Serial
impact dot matrix
Print Head: 18-pin
| Speed
(cps): |
10
cpi
|
12cpi
|
16.7
cpi
|
|
DP
|
500
|
600
|
500
|
|
LQ
|
125
|
150
|
125
|
Fonts:
Gothic,
Courier, Wide Gothic, Gothic Italic, Courier Italic,
Micro-Gothic, OCR-A, OCR-B
Bar Codes: Interleaved
2 of 5, Bidirectional 2 of 5, Matrix 2 of 5, Industrial
2 of 5, Code 3 of 9, EAN-2, EAN-5, EAN-8, EAN-13, Code
11, Code BCD, Codabar a/t, Codabar b/n, Codabar c/*,
Codabar d/e, UPC-A, UPC-E, UPC-2, UPC-5, Code 93, Code
128 (A-B-C), MSI, POSTNET
Options: IGP and QMS.
Character
Sets:
DEC® VT100 Line Draw; IBM® Set I, II, and All
Character Set; 18 international character set substitution;
IBM Code Page - 437, 850, 852, 863; ISO 8859-1, -2,
-3, -4, -9; Roman 8; Mazowia (Poland)
Print
Modes:
Proportional, compressed, shadow, double strike, underline,
expanded (2 to 8 times), superscript, subscript, oversize
Head
Slew:
50 ips maximum
LF
Interval: 35 msec at 6 lpi
Character
Spacing: 10, 12, 13, 15, 16.7, 17.1, and
20 cpi, plus program selectable
Line
Spacing: 3, 4, 6, and 8 lpi, plus n/144 in.
program selectable
Print
Line: 13.6 in.
Dot
Graphic (dpi): 60 to 400H x 72 to 144V (emulation
dependent); supports DEC Sixel Graphics
Print
Control
Margins: Left
and right any position
Horizontal Tabs:
32*
Vertical Tabs:
12*
Print Position:
Absolute
and relative HxV head position*
Formats: 4
user-defined forms
Auto-Perf Skip:
Selectable
auto-perf skip
*Emulation dependent
Flexible
Paper Handling
| Model |
Front/Bottom
Feed |
Rear/Manual
Feed |
Forms
Thickness
Adjust |
| 3840EP |
Yes |
Yes |
Auto |
| 3840EM |
Yes |
Yes |
Manual |
| 3810S |
Yes |
No |
Manual |
Paper
Handling: Paper parking, auto top of form,
zero-inch tear-off, paper out sensor, auto forms thickness
adjustment, and paper motion sensor (3840EP only)
Paper
Drive: 6-pin push tractors
Paper
Dimensions: Continuous forms 3" to 16"
W x 22" L maximum; single document insertion 3.5"
to 17" W x 5" to 17" L with minimum W
to L ratio of .45
Number
of Copies: Original plus 5 in front/bottom
and rear paper path
Max.
Forms Thickness: 0.025
in.
Paper
Slew: 5/15 ips
Emulations
ANSI
X3.64, GENICOM 3410, Epson® FX286e, IBM Proprinter
III XL, IBM-GP, DEC LA210
Interfaces
and Connectivity
CENTRONICS®
parallel - 36-pin Amphenol; speed: 3Kbytes/sec
EIA/TIA-232
(RS-232) serial - 25-pin type DB female; speeds: 110,
300, 600, 1200, 2400, 4800, 9600, 19200 baud
Input
Buffer: 64K
Options: RS-422,
IBM Coax/Twinax, TCP/IP, Novell
Physical
Size (HxWxD):
12.1
x 26.9 x 13.9 in. (296 x 683 x 353 mm)
Weight:
52 lbs (23.6 kg)
Acoustics:
55 dBa in quiet mode (3810S: 58dBa)
Operating
Environment
Voltage:
115 or 230 ±15% externally selectable;
50 or 60 Hz ±2 Hz
Power
Input:
Standby: 35 watts (120 BTU/Hr)
Printing:
130 watts (433 BTU/Hr)
Temperature:
50° to 104° F (10° to 40° C)
Humidity:
20% to 90% relative
Reliability
MTBF:
10,000
hours @ 25% duty cycle
Workload: Up
to 27,000 pages per month
MTTR:
30
min. by a qualified technician
Print
Head :
700 million draft characters
Ribbon
Life: 15
million draft characters
Ribbon
Type:
Cartridge, clean hands, nylon fabric
Life:
15
million draft characters
Warranty
1
year return to depot
Accessories
and Upgrades
Pedestal,
Paper catch tray,
Forms rack, Paper basket, Output paper rack, RS-422 interface |