TechNote  40T-043

4410 / 4440  Series

POSTNET Barcoding Using High Speed Draft Font
2-11-92 Pat Hennigan

Models: 4410 / 4440

Summary:
 A POSTNET barcode will not print if the printer is selected for the High Speed font.

Resolution:
 


SYMPTOM:  A POSTNET barcode will not print if the printer is selected for the
High Speed font. This conflicts with user manual GEK-88832B, appendix L-5,
which states: "POSTNET codes cannot be used on the same line as the high
speed font".

CAUSE:  This is normal operation by design. User manual is incorrect.

ACTION:  You must exit High Speed Font mode before printing a POSTNET
barcode. Prior to sending [50} send an [10m to place the printer in
a Data Processing font. The printer will now print the POSTNET barcode
normally. Return to High Speed font by sending an [15m when needed. All
other fonts style's allow you to access the POSTNET barcode.

Specifications subject to change without notice.
® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact
TallyGenicom Technical Support.
TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.