Detailed information in User's Manual,
               pp. H4 - H5 (std. model) or H6 - H8 (XT model)

  1. Take printer off-line.
  2. Press PRG (Program) key.  Program menu will print.
  3. Press "8" (Set TOF) key.  Program menu prints:
        Printer Control Straps:
        0. Exit
        1. Printer Straps A
        2. Printer Straps B
  4. Press the number for the strap set you wish to modify.
     Display shows:  "01o" (Set A selected); or
                     "33o" (Set B selected) Note: small "o" might be
                     a small "1", depending on setting.
  5. Operable keys are: (Shown in menu printout when strap set selected).
        Key 0 - Save/review Changes (this doesn't print out)
        Key 1 - Set Strap IN
        Key 2 - Set Strap OUT
        Key 3 - Forward Without Change
        Key 4 - Reverse Without Change
  6. Use Key 3 to advance to strap settings to change; use Keys 1/2 to
     set straps in/out; and use Key 0 to review your changes. (This will
     print a new strap listing.
  7. When finished, Press "0" Key to return to menu.  Press "0" key
     again to return to offline mode; or select other options to change.
        
        Note: Strap Set B will display as numbers 33-64; while the
        printed listing and the book will refer to them as B01 - B32.
        You must subtract "32" from the displayed number to determine
        which strap you are changing.  Fortunately, the charts in the
        book will list BOTH numbers.