4410 / 4440 SERIES
 
SETUP PROCEDURES



4410 / 4440 STATUS / CONFIG PRINT 


  NOTE:
  The actual printout is the configuration menu; but it functions as
  the printer status report.

  1. Take printer off-line (Loc).  Press PROGRAM (PGM) key.
  2. Configuration menu will print.  To change settings, press the NUMBER
     key associated with that setting on the menu; and follow further
     printed instructions / options.
  3. Press TEST /CLR (Zero key) to exit menu levels & return to Loc mode.

 SAMPLE MENU: (page 2-14 in 4410/4440 manual; 2-23 in 4410/4440 XT manual)
     THE PRESENT CONFIGURATION IS: (44A512676 SY - 44A512677 IM)
     1.  FONT:
         Style - 10 CPI
         Country - USA
         Mode - Normal
         Horizontal Expansion - X1
         Vertical Expansion - X1
     2.  LPI - 6 lpi
     3.  Forms Control (inches)
         Form length - 11.0
         Top Margin - 0.0
         Bottom Margin - 0.0
     4.  Interface Control:
         Interface Type - Parallel (Centronics Type)
                   (etc)
 -------------------------------------------------------------------------


Specifications subject to change without notice.
® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact
TallyGenicom Technical Support.
TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.