4490XT SO and SI Control for Postnet Barcode

TechNote 40U-033

4490XT Series

4490XT SO and SI Control for Postnet Barcode
10/20/97 Jerry Babral

Models: 4490XT, 48XX

Summary:
Existing applications cannot use SO and SI to turn Postnet barcodes on and off.

Resolution:



By design the 4490XT (and 4810/40) will not permit the use of
SO and SI to turn Postnet barcodes on and off. The user must
use Esc[3t and Esc[0t.

Specifications subject to change without notice.
® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact
TallyGenicom Technical Support.

TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.