4800  SERIES
 
SETUP PROCEDURES



4810 / 4840 REDUCED SLEW SETTING 


  1. Take printer off-line.
  2. Press Program (Enter) key. Display -> "PRG:FONT".
  3. Press PREV OPTION (CPI-LPI) key until DIsplay -> "PRG:Engine Opts".
  4. Press PROGRAM (Enter) key.  Display -> "EOpt:SLEW Rate".
  5. Press PROGRAM (Enter) key.  Display -> "Slw: Normal".
  6. Press NEXT OPTION (On Line) key.  DIsplay -> "Slw: Reduced".
  7. Press PROGRAM (Enter) key.  Display will flash "Rate Selected;
     then display "Slw: Reduced".
  8. Press QUIT (Clr Test) key to return to offline mode.

     To reverse this setting, follow above procedure through
     Step 5.  Display -> "Slw: Reduced".
 6a. Press NEXT OPTION key.  Display -> "Slw:Normal".
 7a. Press PROGRAM key.  Display will flash "Rate Selected";
     then display "Slw: Normal".
 8a. Press QUIT (Clr Test) key to return to offline mode.


Specifications subject to change without notice.
® All trademarks are property of their respective holders at the time of this publication.

If you have any questions or comments regarding this document, please contact
TallyGenicom Technical Support.
TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom, or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom, or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.