TechNote:	GEN_T_056
Product Line:	3810/3840/3870 and 3860/3880
Description:	Instructions for Replacing the Print Head
Date:	01-17-2006
Contributors:	Leon Johenning

Issue / Symptom:

How to replace the Print Head. NOTE: The same printhead is used in the 3870 based printers and 3880 based engines. When installing thei head in the 3870, the Impact Force MUST be set or poor print quality and head failure will result.

Solution/Action:

GEK-01026A.pdf

Additional Notes/Comments:

Specifications subject to change without notice. ® All trademarks are property of their respective holders at the time of this publication. If you have any questions or comments regarding this document, please contact TallyGenicom Technical Support. TallyGenicom has taken care to ensure that the information is complete, accurate and up-to-date. However, TallyGenicom assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of TallyGenicom. This information is provided "as is" without warranty of any kind. TallyGenicom disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall TallyGenicom or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if TallyGenicom or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.